top of page

Are you tired of death wobble and loose steering in your Dodge Ram?

 

We have the perfect upgrade for you! Our heavy duty 03-13 Dodge RAM crossover steering upgrade kit is a huge upgrade from the factory style steering.

 

Our steering does not have weak, failure prone ball joints, but instead it has fully adjustable and replaceable high precision heim joints.

 

Each 7/8 heim joint is made out of chromoly heat treated steel, and has a static deformation load of 45,000 lbs. and a breaking strength of over 65,000 lbs. That's a insane amount of load stress so you’ll never have to worry about a heim breaking. We have hardcore tested these kits and heims for over 10 years without one ever failing.

 

 

LIFETIME WARRANTY on the welded steel parts! We guarantee the tube and welds against failure for life. (valid to original purchaser only, heims and hardware are not covered)

 

 

Each end of the steering links is adjustable and individually replaceable, making it affordable to rebuild the steering.

 

Each tierod is precisely bent to offer optimal clearance on any aftermarket deep pan diff covers or dual shock setups.

 

 

The kit is available to fit different lift sizes, years and models and also available with single or dual stabilizer shocks brackets.

 

If you plan on running stabilizer shocks, you will need to select the shock options you need.

 

THIS KIT WILL NOT WORK WITH THE FACTORY STABILIZER SHOCK BRACKET.

 

To run just 1x shock you must buy a axle mount shock bracket, or if you already have dual shocks select "TIEROD CENTER BRACKET ONLY'',  click  HERE  for the axle shock brackets.

 

 

If you want to run dual steering shocks simply select  "DUAL SHOCK BRACKET KIT"  and the steering will come with a prewelded tierod center bracket and dual Bolt-on axle shock mount brackets.

 

 

 

Available for 2003-2013 4x4 2500-3500 models with straight axle front ends. Will NOT fit 1500 rams with a IFS or 2wd trucks.

 

This kit will not fit late 2013 and up 4th gens with the new style steering, 2014 and up trucks steering is availabe on 14-24 Dodge Ram products page.

 

 

Drag link measurement that's required is from the Passenger side knuckle, (by the brake rotor and tire) to the pitman arm bolt center. Typical measurement should fall between 40-43''.

 

 

We highly recomend purchasing our Tierod Aligment tool if planning to install the steering kit yourself, it will save you a trip to a alignment shop!    Click HERE  for the Alignment tool.

 

 

Kit ships in bare steel, and is ready for paint or powdercoat.

 

EACH KIT IS CUSTOM BUILT TO ORDER, Current build times are approximately 1-3 weeks.

03-13 Dodge RAM Crossover Steering Upgrade Kit

SKU: DG0313CS
PriceFrom $630.00
  • As all steering kits are custom made to order, we do NOT accept any returns and we will not cancel order or issue any refunds after 24 hours from exact date order was placed. 24 hours after the order is placed the order is FINAL and we will NOT refund or accept any returns as the parts move forward into the custom building process.

    If there is any issues with fitment or any product flaws and we will do our best to fix any problems. Please contact our office by email.

    ALL SALES ARE  FINAL!

     

    FOR LIABILITY PURPOSES ALL STEERING KITS AND PARTS ARE SOLD "AS IS" AND AS ''OFFROAD USE ONLY, USE ON ROAD AT OWN RISK. (kits work perfectly fine on road)

  • Heim size 7/8''  Chromoly steel, (60,000 lb to deformation).

    Bushings- 5/8'' hole hardened stainless steel

    Main bolt size- 5/8 or 3/4'' grade 8 fine thread with nylock nuts.

    Dom tube- 1/4 wall x 1.5 OD.

    Shock brackets- 1/4'' thick prewelded. w. 1/2'' holes. For standard shocks.

    5/8 or 3/4 steel drill bit is needed to install. Professional install is highly recommended, preferably offroad shops that are familiar with heim joint steering kits.

     

bottom of page